High Power Wireless Router 2T2R Long Range 800mW 300mbps - VHR303R

High Power Wireless Router 2T2R Long Range 800mW 300mbps - VHR303R High Power Wireless Router 2T2R Long Range 800mW 300mbps - VHR303R

Visonicom VHR303R is a 2T3R 300Mbps high power wireless router 800mW(29dBm) provides long range, high performance wireless Internet access over extremely wider coverage.

VHR303R long range WiFi router is equipped with advanced dual 2.4GHz wireless amplifiers and 3 detachable high gain antennas to provide up to 3,000 m2 of high performance Wi-Fi coverage with the 2T3R MIMO Wi-Fi technology for ultra-fast wireless speeds.

The high transmission power up to 29dBm(800mW) enables the WiFi transmission extending particular long range, and the high receiver sensitivity up to -95 dBm makes the high power WiFi router communicate with client devices (WiFi adapters of PC, mobile devices, etc) stably. High transmission power with high receiver sensitivity ensures quality and stable wireless connection at home or office.

Extreme Range Wi-Fi Coverage
Ensure long range wireless Internet access to your home or office. Dual high power amplifiers and 3 high gain antennas provide the power to add up to 3,000 m2 of amplified wireless coverage.

Penetrate Walls and Eliminate Dead Spots
High transmission power and high receiver sensitivity provide powerful Wi-Fi coverage that easily penetrates walls and Wi-Fi obstructions to provide Wi-Fi coverage in hard to reach areas. The long range WiFi router is great for providing powerful wireless coverage for larger homes, backyards, offices and warehouses.

Simple Setup and Multimode Support
The configuration UI of the high power WiFi router is very clear and simple for everybody, though all the functions and features are there. Multiple operation modes(Gateway, Bridge, WISP, AP Client) supports flexible Wireless LAN implementation.


Model VHR303R (4M/32M)
Standards IEEE 802.1d (Spanning Tree Protocol)
IEEE 802.11b (11 Mbps Wireless LAN)
IEEE 802.11g (54 Mbps Wireless LAN)
IEEE 802.11n (300 Mbps Wireless LAN)
IEEE 802.1x (Network Access Control)
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)
General Ethernet port: 5 RJ45 10/100 Mbps data port; one WAN and four LAN interface
Flash: 4 MB
Memory: 32 MB SDRAM
Frequency range 2.400 - 2.483 GHz
Modulation technologies 802.11b: Direct sequence Spread Spectrum (DSSS): DBPSK, DQPSK, CCK
802.11g: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM, 64QAM
802.11n: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM, 64QAM
Data rates IEEE 802.11b (11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps)
IEEE 802.11g (54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps)
IEEE 802.11n (MCS0-15: up to 300 Mbps)
Output power 802.11n: 25 dBm +/- 1.5 dBm @300 Mbps
802.11g: 25 dBm +/- 1.5 dBm @54 Mbps
802.11b: 28 dBm +/- 1.5 dBm @11 Mbps
Receiver sensitivity 11n (300 Mbps) MCS0-15: -73 dBm
11g (54 Mbps) OFDM: -73 dBm
11b (11 Mbps) CCK: -95 dBm
Operation modes Gateway mode
Bridge mode(Bridge AP, Bridge Client, Bridge WDS, Bridge WDS + Repeater)
AP Converter(WISP) mode
AP Client (universal repeater) mode
Wireless security WEP encryption (64/128 bit)
WPA2 mixed
802.1x Authentication
Client access control through media access control (MAC) filter
Antenna Three 5dBi dipole antenna
Power 12V, 1.25A / 1.5A through RJ-45 connector. Maximum input Voltage =48V
LEDs Power
LAN Link/Act
Environmental Operating temperature: 0°C - 50°C
Operating humidity: 10 - 95% RH, non-condensing
Power Adaptor: 12V 1A


Additional Info

  • Chipset: Realtek RTL8196C
  • Firmware: Linux SDK
  • WiFi Frequency: 2.4GHz 11n/g/b
  • WiFi Data Rate: 300Mbps
  • WiFi Power: 29dBm 800mW High Power
  • Internet Access Mode: PPPoE-ADSL/ONU, Dynamic IP, Static IP, PPTP, L2TP, WISP
  • Operation Mode: Wireless Router, AP/Gateway, AP Client/Repeater, WISP
  • LAN Port: RJ45 * 4*100Mbps
  • USB Port: N/A

Product Shortcut

Quick Contact

Hotline: 86-755-2791-0303
Skype: visonicom
ICQ: 77681269
QQ: 36554529